Avaya P333R-LB Manual Do Utilizador
Chapter 13
Layer 3 Redundancy
116
Avaya
P333R-LB User’s Guide
master of all the virtual routers, using the priority command if necessary.
For SLB, a modification to VRRP is necessary. In this case, you need to backup the
VIP (in addition to a routing interface of the router). An interface on the VIP’s
subnet still has to be configured. The VIP will be configured as the Associated IP of
the VRRP.
For SLB, a modification to VRRP is necessary. In this case, you need to backup the
VIP (in addition to a routing interface of the router). An interface on the VIP’s
subnet still has to be configured. The VIP will be configured as the Associated IP of
the VRRP.
Note:
When two P333R-LBs are connected in a VRRP pair with Full NAT configured
on both, you need to configure different PIP address ranges for each P333R-LB.
VRRP Commands
The following table displays the VRRP Commands:
Figure 13.1
VRRP Commands
In order to...
Use the following command...
Display VRRP information
show ip vrrp
Display full VRRP-related
information
information
show ip vrrp detail
Enable/disable VRRP routing
globally
globally
router vrrp
Create/delete a virtual router on the
interface
interface
ip vrrp
Assign/remove an IP address to the
virtual router on the interface
virtual router on the interface
ip vrrp address
Set the virtual router advertisement
timer value (in seconds) for the
virtual router ID
timer value (in seconds) for the
virtual router ID
ip vrrp timer
Set the virtual router priority value
used when selecting a master router
used when selecting a master router
ip vrrp priority
Set the virtual router simple
password authentication for the
virtual router ID
password authentication for the
virtual router ID
ip vrrp auth-key
Configure the router to preempt a
lower priority master for the virtual
router ID
lower priority master for the virtual
router ID
ip vrrp preempt