Toshiba W43 Manual Do Utilizador

41

Eng

lis

h

CONTROLS AND FEATURES

The settings configured in Wireless Setup can be 
confirmed.

a

Press QUICK to open the Quick Menu.

b

Press 

B

/

b

 to select Wireless Information and 

press OK.

c

When the Network Type is Wireless, a Wireless 
Information window will appear.

NOTE: Press the RED button to scan for all APs.

NOTE: Even if an AP for IEEE 802.11n is used when 
Encryption is set to WEP or TKIP, the Speed value might 
be low. It is recommended that Encryption be changed to 
AES (see “Manual Setup” on page 40).

• The function of all IEEE802.11 is not supported.

• The ad-hoc mode is not supported.

• It is recommended to use IEEE 802.11a or IEEE 

802.11n on 5 GHz for audio and SD video streaming.

• It is recommended to use IEEE 802.11n on 5 GHz for 

HD video streaming.

• It is recommended that the encoding rate for streaming 

video content is 20 Mbps or less.

• It is not recommended to use 2.4 GHz for audio and 

video streaming.

• Content playback may be interrupted by various 

surrounding interference.

Status

Connected is displayed when the TV is 
connected with the AP.
Disconnected is displayed when the 
TV is not connected with the AP.

Signal

Connection signal strength with AP 
(STRONG/MEDIUM/WEAK)

Speed

Link with AP

Mode

Working mode (11a, 11b, 11g, 11n)

Network 
Name

SSID set

Authentication

Authentication set

Encryption

Encryption set

Security Key

Security Key set

AP MAC 
Address

The AP’s MAC address is displayed 
when the TV is connected with the AP.

TV MAC 
Address

The MAC address of the TV(Wireless) 
is displayed.

DHCP

Enabled is displayed when using 
DHCP.
Disabled is displayed when not using 
DHCP.

IP Address

The TV’s IP address

Subnet Mask

Value of the Subnet Mask

Default 
Gateway

Address of the Default GATEWAY

DNS

Address of the DNS