Toshiba W43 Manual Do Utilizador

5

Eng

lis

h

INSTALLING YOUR TV

Locate the television away from direct sunlight and 
strong lights. Soft, indirect lighting is recommended for 
comfortable viewing. Use curtains or blinds to prevent 
direct sunlight falling on the screen.

The LCD display panels are manufactured using an extremely high level of precision technology; however, 
sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not 
a sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure 
will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or 
openings in the case.

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. 
Studies indicate that plastics may weaken and crack over time from the combination effects of 

chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could 
result in serious injury and/or permanent damage to TV and TV pedestal.

Use a wall bracket appropriate for the size and weight of 
the LCD TV.

• Two people are required for installation.

• Install a wall-mount from another manufacturer.

Unplug and remove any cables and/or other 
component connectors from the rear of the TV.

Carefully lay the front of the unit face down on a flat, 
cushioned surface such as a quilt or blanket.

Follow the instructions provided with your wall bracket. 
Before proceeding, make sure the appropriate 
bracket(s) are attached to the wall and the back of the 
TV as described in the instructions provided with the 
wall bracket.

Always use the screws supplied or recommended by 
the wall mount manufacturer.

Carefully lay the front of the unit face down on a flat, 
cushioned surface such as a quilt or blanket. Leave 
the stand protruding over the edge of the surface.

NOTE: Extreme care should always be used when 
removing the pedestal stand to avoid damage to the 
LCD panel.

Remove the screws.

Once you have removed all screws holding the 
pedestal stand in place, remove the pedestal stand 
from the TV by sliding the pedestal stand away from 
the TV.

• Interoperability with MHL devices of other 

manufacturers is not guaranteed. 

• Toshiba does not provide any guarantee, therefore, 

against operational failure such as that described below 
when an MHL source is connected to the TV.

  - No picture or sound

  - Some of the functions do not work by remote 

operation from the TV

• If the MHL does not work properly, also contact the 

manufacturer of the source device for advice on its use. 

Screw 
(supplied)

9 mm

20 mm

4 mm

Screws