Marshall electronic V-RD151PV Folheto

1) Before Installation
• Before using your monitor, make sure to read this manual carefully. 
  In case of any problems with installation, contact Marshall Electronics.
• The monitor should be handled with caution and not be exposed to impact or shock.
• The display area is highly prone to scratches. Use cleaner suggested by the authorized service center.
• Do not expose the monitor in high temperature or in high humidity.
• There are no user serviceable parts inside your monitor. To avoid risk of electric shock, do not open your monitor case!
2) Components
  Rackmountable TFT LCD Monitor- 1 pc

  Power Cable 1- pc
  Computer Cable 1- pc
3) Operation
 Multiple 

Input 

Terminal

1

4) Mounting
The V-RD151P is designed to fit in a EIA standard 19” rack. It requires 
only 1 rack unit of vertical space and is secured with four screws. 

1) Computer Mode Selection
Press Menu   Select (INPUT) using the UP, DOWN keys   press Select (MONITOR) and than press select.
2) Horizontal Pan / Vertical Pan Control
Press Menu   Select (HORIZONTAL PAN ) or (VERTICAL PAN)   control (HORIZONTAL PAN) or (VERTICAL PAN) by 
pressing the UP, DOWN keys.
3) Value Default
Press Menu   Select (SYSTEM SETTING)   press Select (VALUE DEFAULT)   press Select  (System control values 
will be initialized as this monitor is manufactured).
4) Color Change
Press Menu   Select (COLOR CHANGE)   Select one of 4 modes to set   you can control selected sub-menu with the 
UP, DOWN keys   press Select   sub-menu (4 color mode) will appear  repeat the above steps until you have settled 
color change   press Menu   when you press menu, you will be asked whether (SAVE YES) or (SAVE NO)   Select 
one of the two options.
Color Change sub-menu will be limited to Brightness/Contrast only.
(If you press menu before selecting (SAVE YES), color will become invalid.)
5) Input Condition Control
Press Menu   Select (SYSTEM SETTING)   Select (INPUT CONDITION)   Select one of the five modes to set.
Control the selected sub-menu with Select key. After tuning is settled, use Menu key to escape from menu tree.

1) Composite Video / S-VHS Selection
By Remote Control
Press Video or S-VHS on remote control directly.
By Menu key
Press Menu   Select (INPUT) using the UP, DOWN keys   press Select (COMPOSITE) or (S-VHS) and than press Select
2) Value Default
Press Menu   Select (MODE)   press Select   Select (NTSC) or (PAL) depends on manufactured country Video Mode 
will not work on (TV) and (Monitor)
3) Volume Adjust
Press Menu   Select (VOLUME ADJUST)   use the UP, DOWN keys   press Select
(If you press menu before pressing select, volume adjust will become invalid)
4) Color Change
Press Menu   Select (COLOR CHANGE)   Select one of 4 modes to set   you can control selected sub-menu with the 
UP, DOWN keys   press Select   sub-menu (4 color mode will appear   repeat the above steps until you have settled 
color change   press Menu   when you press Menu, you will be asked whether (SAVE YES) or (SAVE NO)   Select 
one of the two options. (If you press menu before selecting (SAVE, YES) color change will become invalid.)   

2

3

4

Input
Volume
Color Change
Channel ADD/REM
System Setting

Television
Volume Adjust
Brightness
Contrast
Hue
Color

Save Yes
Save Yes

Increment
ADD/Remove

Present
Channel No

Value Default
TV = Air CH

CABLE
AIR

-                               +

Input

Color Change

System Setting

Monitor

Brightness
Contrast

Save Yes
Save No

-                               +

Horisontal Pan

Vertical Pan

Value Default

Input Condition

H/V SYNC POLA 
IN CLK EDGE U/D
OUT CLK U/D
ADC CLK PHASE
PIXEL FREQUENCY

V-RD151P 

Users Guide

 

Marshall Electronics