VIZIO M420NV Manual Do Utilizador

VIZIO M420NV User Manual 
 

52 

www.VIZIO.com 

1.  Turn on the Cable or Satellite Set-Top Box. 
2.  Press and release the CABLE button on your VIZIO universal remote control. 
3.  Press and hold the SET button until the 

LED flashes twice. 

4.  Find the programming code for your Cable 

or Satellite Set-Top Box and enter it using 
the number buttons. If the code is accepted, 
the LED flashes twice after the last digit is 
entered. If the LED does not flash twice, 
repeat Steps 2 through 4 with the next code 
listed. 

5.  Point the remote control at the Cable or 

Satellite Set-Top Box and press POWER. 
The Cable or Satellite Set-Top Box will turn 
off. If the Cable or Satellite Set-Top Box 
does not turn off, repeat Steps 2 through 4 
with the next code listed for the component 
and manufacturer. 

•  If the codes do not work or your brand is not listed, see “Searching for Component Codes.” 
•  Sometimes a code listed will only include limited functions.  Try other codes that may include 

more functionality. 

If you cannot find the manufacturer in the list or the program code does not work, you can use the remote 
control to search for the correct device code. 

1.  Turn on the device. 
2.  Press the matching device button on your VIZIO universal remote control. 
3.  Press and hold SET until the LED flashes twice. 
4. Press 9 9 1.  The LED flashes twice. 
5.  Point the remote control at the device and then press and hold POWER until the device turns off.  

 

1.  Press and hold SET until the LED flashes twice. 
2. Press 

9 1 9 1 9. The LED flashes twice.