NEC E462 Guia Do Utilizador

Página de 36
English-11
English-10
English
Attaching the Base
E322 / E422 / E462
E552
1�  Place the display face down on a soft and flat surface to prevent 
scratching and damage�
2�  Carefully align the base to the stand and fasten the screws with a cross-
head screwdriver�
CAUTION: The base of the stand is very heavy� Install with care to avoid injury 
such as dropping the base onto one's foot�
Place The Display On A Solid Surface
Ensure that the LCD display is 
placed in a position to allow free flow 
of air� Do not cover the ventilation 
openings on the back cover� Do not 
place the display near any open 
flames. Do not allow the display to 
be placed in an environment where 
it can be exposed to heat, direct 
sunlight, or rain and water� Do not 
expose the equipment to any liquid�
Antenna Connection
Unless your LCD display is connected 
to a cable TV system or to a centralized 
antenna system, a good outdoor color 
TV antenna is recommended for best 
television performance� However, if you 
are located in an exceptionally good 
signal area that is free from interference 
and multiple image ghosts, an indoor 
antenna may be sufficient.
When using a 75-Ohm coaxial cable system, connect the CATV coaxial cable 
to the AIR/CABLE (75-Ohm) terminal� Or if you have an antenna, connect the 
coaxial cable to the same AIR/CABLE terminal�
Min
1 m