NEC E462 Guia Do Utilizador

8� 

USB/SERVICE – Insert USB storage device to view photos and listen to 

the music� /This USB slot is for future software upgrades�

9� 

RS-232C – Input from external equipment such as a PC or AV control 

system in order to control RS-232C functions�

Once your AV device is connected, press the Source button on the remote 

control to select the relevant source to view� (ex: Press COMP button to select 

“Component” if you have connected a source to the Component input�)

Attach an RS-232C cable cross-type (commercially available) to the supplied 

Din/D-Sub RS-232C for the connections�
Note: This operation system should be used by a person who is accustomed 

to using computers�

Set the RS-232C communication settings on the PC to match the TV's 

communication conditions�
The TV's communication settings are as follows:

9,600 bps

8 bits

None

1 bit

None

Send the control commands from the PC via the RS- 232C connector�
The TV operates according to the received command and sends a response 

message to the PC�
Do not send multiple commands at the same time� Wait until the PC receives 

the response before sending the next command�

Blue

v

v

v

v

v

Purple

v

-

-

-

-

Red

v

v

v

v

v

Power saving support automatically power on when signal appear� 
Standby to power on by touch up remote or keypad power button�