Honeywell HD-16DVR-C Manual Do Utilizador

Honeywell 

 

43 

  Event type: Select local input. Network input is not effective in HD-

16DVR-C.  

  Type: Normally open or normally closed. 
  PTZ activation: Here you can set PTZ movement when the alarm 

occurs. For example, go to preset, tour& pattern when there is an 
alarm. Click Select, and you can see an interface as shown in 

. 

 Period: 

Click 

Set, and you can see an interface as shown in 

. Here you can set for business days and non-business days. In 

, click Set, and you can see an interface shown in 

. Here you can set your own setup for business days and non-

business days. 

  Show message: The system alert you on the local host screen if you 

enabled this function. 

  Send email: The system can send out an email to alert you when an 

alarm occurs.  

  Record channel: You can select the proper channel to record an alarm 

video (Multiple choices). At the same time you need to set alarm 
recording in the schedule interface (Main MenuSettingSchedule) 
and select the automatic record in manual record interface (Main 
MenuAdvanceManual Record). 

  Alarm output: When the alarm sounds, the system enables the 

peripheral alarm devices. 

  Delay: When the input alarm is completed, the system continues the 

alarm output and/or recording for a specified time respectively. The 
value ranges from 10-300(Unit: second) 

  Tour: Here you can enable the tour function when the alarm occurs. It 

is a one-window tour; go to 

 on page 

setup. 

Note 

If there are record channels selected, only the record 
channels will be displayed in the tour. 

  Video Matrix: when the motion is detected, video will be displayed on 

the monitor connected to the SPOT (matrix) output of the DVR. 

Check boxes to select the corresponding function. After completing all the 
settings, click Save, and the system goes back to the previous menu.