Honeywell HRDE4X4 Manual Do Utilizador
![Honeywell](https://files.manualsbrain.com/attachments/04072ac208afe0f60402a9212acd23d57421a7fb/common/fit/150/50/3e168605118cbbd2e280a10aaeca155d86bc5b4c616b0334def9ca6d226c/brand_logo.png)
Rev 2.00
6
Document 900.0399
03/06
Typical DVR Installation
Setting Unit for NTSC or PAL
Before turning on your DVR, set the switch (see
) to NTSC or PAL to match your
equipment. If your DVR is already powered, unplug the power cord from the wall outlet.
Wait a few seconds, set the switch (see
Wait a few seconds, set the switch (see
), and then re-apply power.
Note
You cannot mix NTSC and PAL equipment. For example, do not connect
NTSC cameras when your DVR is set to PAL. Similarly, do not connect a
PAL camera and an NTSC monitor.
PAL camera and an NTSC monitor.
Four Audio
Inputs
Inputs
Audio Line
Output
Output
Four Sensor
Inputs
Inputs
LAN for Remote
Access Software
Connection
Access Software
Connection
1 Internal Alarm
Output Relay
Output Relay
CCTV Monitor
VGA Monitor
Four Video Inputs for Cameras
RS-232 for
Engineering Use
Engineering Use
To 12 VDC
Adapter
Adapter