Epson DH200 Manual Do Utilizador
64
Remote Setup
NETWORK
The Network displays network information in a
"General" tab and email options in an "Email"
tab.
"General" tab and email options in an "Email"
tab.
To view network information:
1. Select the GENERAL tab (default) and view
the following:
• CONFIG: Displays your current
• CONFIG: Displays your current
networking configuration—by default,
DHCP
DHCP
• IP SETUP: Displays your current IP
address, gateway, subnet mask, and port
(by default, 7000)
(by default, 7000)
2. Under BANDWIDTH, select the following
from the drop-down menu:
64 KBPS
,
128
KBPS
,
256 KBPS
,
512 KBPS
,
1 MBPS
,
2 MBPS
,
4 MBPS
,
8 MBPS
, or
UNLIMITED
.
3. Click APPLY and then OK to save your
settings and close the window.
EMAIL
To configure email options:
1. Enter up to five email addresses in
E-MAIL field 1~5. They will be the email
addresses that receive the email
notifications from the DVR.
addresses that receive the email
notifications from the DVR.
2. Under EMAIL USE, select DEFAULT
(recommended) or SMTP. If you select
DEFAULT, go to step 8. If you selected
SMTP, go to step 3.
DEFAULT, go to step 8. If you selected
SMTP, go to step 3.
3. Under SMTP SERVER, enter your SMTP
email server.
4. Under SMTP PORT, enter your SMTP port.
5. Under SMTP AUTH, select
5. Under SMTP AUTH, select
ON
.
6. Under SMTP USER ID, enter your SMTP
user name
.
7. Under SMTP PASSWORD, enter your
SMTP
password
.
8. Click APPLY and then OK to save your
settings and close the window.
Figure 38.0 Network information
Figure 38.1 Email options