Honeywell HSVR-16 Manual Do Utilizador
Web Client Operation
118
Parameter
Function
HTTP Port
Default value is 80.
Max Connection
Network user max amount. The value ranges from 0
to 10.
0 means there is no user can access current device.
to 10.
0 means there is no user can access current device.
Remote
Host
Host
PPPOE
Input the PPPoE user name and password you get
from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then
reboot the device to get the setup activated.
Device connects to the internet via PPPoE after
reboot. You can get the IP address in the WAN from
the IP address column.
Please note if you want to reboot the device please
make sure you have proper reboot authority and
there is no local login user in the current device.
from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then
reboot the device to get the setup activated.
Device connects to the internet via PPPoE after
reboot. You can get the IP address in the WAN from
the IP address column.
Please note if you want to reboot the device please
make sure you have proper reboot authority and
there is no local login user in the current device.
Email
The email interface is shown in
.
Figure 6-34 The Email Setup Menu
Please refer to the following sheet for detailed information.