JVC VR-N900U Manual Do Utilizador
53
Specifying an Output Port
A specific event or the clicking of an event button can be
associated with a particular output port.
To do this, specify the output port from which output will be
triggered when a specific event or manual action occurs.
associated with a particular output port.
To do this, specify the output port from which output will be
triggered when a specific event or manual action occurs.
1
Select [I/O Control] in the [Camera Record
Setting] window.
Setting] window.
A dialog box will appear.
2
Select the required event from the list in the
left side of the window.
left side of the window.
3
Select the required output and click the [
]
button located below the [Selected Outputs]
list.
list.
To remove an output from the [Selected Outputs] list, select
the required output, and click the [
the required output, and click the [
] button.
Output Settings for Cameras
You are able to associate a camera with particular external
outputs, defined in the [I/O Setup] window, for example the
sounding of a siren or the switching on of lights.
The associated outputs can be triggered automatically when
motion is detected as well as manually through output
buttons.
You access the [Output Settings] window from the [Camera
Settings] window (
outputs, defined in the [I/O Setup] window, for example the
sounding of a siren or the switching on of lights.
The associated outputs can be triggered automatically when
motion is detected as well as manually through output
buttons.
You access the [Output Settings] window from the [Camera
Settings] window (
Page 28), by clicking the [Outputs]
button.
● Selecting Output for Manual Control
You are able to specify outputs to be triggered manually
through output button or from a list in the [Live Viewing]
window.
You are able to specify outputs to be triggered manually
through output button or from a list in the [Live Viewing]
window.
1
Select the required output in the [All Outputs]
list.
list.
2
Click the [
] button located between the [All
Outputs] list and the [On Manual Control] list.
• This will copy the selected output to the [On Manual
Control] list.
• You are able to move a selected output up or down in the
[On Manual Control] list with the up and down buttons
located to the right of the list.
located to the right of the list.
• To remove an output from the [On Manual Control] list,
select the required output, and click the [
] button
located between the [All Outputs] list and the [On Manual
Control] list.
Control] list.
● Selecting Output for Use on Motion Detection
You are able to select outputs to be triggered automatically
when motion is detected in images from the camera.
You are able to select outputs to be triggered automatically
when motion is detected in images from the camera.
1
Select the required output in the [All Outputs]
list.
list.
2
Click the [
] button located between the [All
Outputs] list and the [On Motion Detected] list.
• This will copy the selected output to the [On Motion
Detected] list.
• To remove an output from the [On Motion Detected] list,
select the required output, and click the [
] button
located between the [All Outputs] list and the [On Motion
Detected] list.
Detected] list.
[I/O Control] window
☞
[Output Settings] window