JVC VR-N900U Manual Do Utilizador

Power cannot be turned on.

Check that the power cable has been plugged in correctly.
Check that the power switch on the rear panel is switched on.

Camera is not automatically detected.

Follow the instructions in the camera’s user manual and check the DHCP 
settings.

 Unable to operate the system by pressing the 
[REC] or [PLAY] button.

Check that operation lock is not engaged.

No images are recorded with recording control 
mode.

Check the settings in the [Camera Record Setting].
Check that the scheduler is set to online.
Check that the camera is in recording control mode.

Unable to play back sound.

Check that audio for the camera device is set to [Enable] in the [Camera Record 
Setting] window.

Unable to operate

While holding the [FUNCTION] button of front panel, press the [OPERATE] 
button for more than 7 seconds to forced power OFF.

• The recorded images that are not archived (

 Page 55) before forced

power OFF may not play back properly.

☞

WARNING: HDD 0 (1)

The HDD seems to be no longer serviceable.
Replacement is recommended.
Consult to your nearest JVC dealer.

OVERHEATED!

Check the temperature of the operating environment.
Check that the fan unit operates properly.
If the temperature of the operating environment is appropriate, consult to 
your nearest JVC dealer.

ENCODER ERROR(format)

Abnormality with the input signal. 
Check the entered image signal.

ENCODER ERROR (xxx)

Other abnormality. 
Consult to your nearest JVC dealer.