Mitsubishi Electronics DX-TL5000E Manual Do Utilizador
130
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Specifications
Specifications
Rated Power Supply:
100 to 240 V AC
±10 %, 50/60 Hz
Rated Input:
1.0 - 0.45 A (100-240 V)
Colour System:
PAL-type colour system.
Operating Temperature:
41
°F-104 °F (5 °C to 40 °C)
Relative Humidity:
Max. 80 (%)
Altitude:
Max. 2000 (m)
Dimensions:
425 (Width) x 390 (Depth) x 185 (Height) (mm)
Weight:
13.4 kg
Recording System
Digital recording system
Sampling
13.5 MHz
Data Compression
JPEG2000
Compression Unit
Frame, Field
Recording Resolution
720 x 576, 720 X 288
Recording Device
250 GB HDD
Video Input:
16 Input BNC-Connectors:
1.0 V(p-p), 75 ohms.
Monitor Output:
S-Connector:
Y-Signal: 1.0 V(p-p), 75 ohms.
C-Signal: 0.3 V(p-p), 75 ohms.
C-Signal: 0.3 V(p-p), 75 ohms.
2 Output BNC-Connectors:
1.0 V(p-p), 75 ohms.
RCA-jack:
1.0 V(p-p), 75 ohms.
Throughout Output:
16 Output BNC-Connectors: 1.0 V(p-p), 75 ohms.
Cascade Video Input:
BNC-Connector:
1.0 V(p-p), 75 ohms.
Cascade Video Output:
BNC-Connector:
1.0 V(p-p), 75 ohms.
*optional audio interface board
Audio Input:
Audio Input:
4 RCA-Jacks:
308 mV(rms), 50 k ohms.
Audio Output:
RCA-Jack:
308 mV(rms), 1 k ohms.
Cascade Audio Input:
RCA-Jack:
308 mV(rms), 50 k ohms.
Cascade Audio Output:
RCA-Jack:
308 mV(rms), 1 k ohms.
Clock:
±20 seconds/month (when power is supplied, 25 °C)
Timer Program:
8 programs-Daily start and stop time for one week x 2 set
Memory Backup:
Lasts for more than 1 month (when fully charged)
CONNECTORS
External storage terminal
External storage terminal
Serial bus (1-6)
Approx. 480 Mbps
Bus power Max. 10 W in total
(For connecting the recommended optional items only)
Control terminals
Clock adjust Input
Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Clock adjust Output
Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
(Clock adjust Output is throughout of Clock adjust Input)
(Clock adjust Output is throughout of Clock adjust Input)
Recording start Input
Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Recording stop Input
Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Emergency Input
Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Mode out +/– (1-4)
Active:
Short
Max. Drive current 500 mA DC.
(Relay output)
Non active:
Open.
Max. Voltage 24 V DC.
Call out +/–
Active:
Short
Max. Drive current 7 mA DC.
(Photo coupler output)
Non active:
Open.
Max. Voltage 24 V DC.
Ground terminal
DC 12 V Output
DC 12 V Output
Max. 350 mA DC (when Main switch and power button is turned on)
Alarm Input (1-16)
Active: When terminals are short-circuited or “Low” Level voltage is applied. Non active: Open.
Alarm Output (1-16)
Active:
“Low” Level
Max. Drive current 7 mA DC.
Non active:
Open.
Max. Voltage 24 V DC.
PTZ terminal
RS-232C terminal
RS-422 terminal
RS-422 terminal
Serial port
RS-232C D-SUB 9 pin
RS-485 port
RS-485 Input/Output RJ-11
Communication
LAN (A, B)
Connector form: RJ-45 Physical interface: 10BASE-T/100BASE-TX
(A for external storage, B for communication)
Card slot for optional board
PCI-compliant slot type (low profile) (For connecting the recommended optional items only)
DVD-R/RW, CD-R/RW recording format
Original format
Accessories:
AC power cord (for U.K/for the Continent)
2
Screws
8
CD
1
Mouse
1
Cable clamping band
2
Ferrite core
1
Installer’s manual (this manual)
1
User’s manual
1
Weight and dimensions shown are approximate.
Design and specifications are subject to change without notice.
Design and specifications are subject to change without notice.
This unit complies with the European EMC test standard EN50130-4.