Philips DVDR5330H Manual Do Utilizador

34

TIPS:  Set the appropriate recording mode for HDD recording.  The same recording mode will be 

used for recording from HDD to a recordable DVD, see page 29.

Use the timer recording to automatically 
start and stop a recording at a later date/
time. This recorder will tune to the right 
programme channel and begin recording 
at the specifi ed time.

With this recorder, you can programme 
up to 8 recordings at a time. During 
timer recording, changing the recorder’s 
channel is not possible.
 
To make a timer recording, your 
recorder needs to know:

–  The date you want to make the 

recording.

–  The recording input source.
–  The start and stop time of the 

recording.

About ‘VPS/PDC’
‘VPS’ (Video Programming System) or 
‘PDC’ (Programme Delivery Control) is 
used to control the start and duration of 
TV channel recordings. If a TV 
programme starts earlier or ends later 
than was scheduled, this recorder will 
then turn on and off at the correct time.

VPS/PDC is intended to record the entire 
programme. To set a time that is longer/
shorter than the VPS/PDC broadcast 
time, you must turn off the VPS/PDC.

This is a simple timer programming 
system. To use it, enter the VIDEO Plus+

®

 

programming number associated with 
your television programme. You can fi nd 
this number in your TV listings magazine.

All the information needed by this 
recorder for programming is contained in 
the programming number. 

A

 Turn on the TV to the correct 

programme number for the recorder 
(e.g. ‘EXT’, ‘0’, ‘AV’).

B

 Turn on the recorder and press TIMER 

on the remote control.

 The timer menu appears.  

C

 Select { VIDEO Plus+

 System } in the 

menu and press OK.

 The VIDEO Plus+

®

 entry menu 

appears.

dvdr3300h_uk_eng_17233d.indd   34

dvdr3300h_uk_eng_17233d.indd   34

2005-10-19   10:41:25 AM

2005-10-19   10:41:25 AM