Philips DVDR5330H Manual Do Utilizador

Setup Menu Options

(continued)

Sound settings

(underlined options are the factory default settings)

Digital Output

This setting is only required if you are using this recorder’s COAXIAL
OUT socket to connect other audio/video device.

{ Off }

– Select this to deactivate the digital audio output. For

example, if you use the AUDIO OUT sockets to
connect this recorder to a TV or Stereo system.

{ All }

– Select this if the connected device has a built-in

Multi-Channel decoder that supports one of the
multi-channel audio format (Dolby Digital, MPEG-2).

{ PCM only } – Select this if the connected device is not capable of

decoding multi-channel audio. The system will
convert the Dolby Digital and MPEG-2 multi-channel
signals to PCM (Pulse Code Modulation).

Analogue Output

This setting is only required if you are using this recorder’s AUDIO OUT
L/R sockets to connect other audio/video device.

{ Stereo }

– Select this to hear the sound from the left and right

audio channels. Use this setting when this recorder is
connected to a TV or Stereo system.

{ Surround } – Select this if the connected audio/video device is

compatible with Dolby Surround. Dolby Digital and
MPEG-2 multi-channel are mixed to a Dolby
Surround-compatible two-channel output signal.

Night Mode

This mode optimises playback of sound at low volume. High volume
outputs will be softened and low volume outputs are brought upward to
an audible level. This feature is only available for DVD video discs with
Dolby Digital mode. Press OK to select:

– Turn on night mode.

– Disable night mode feature. Select this to enjoy the

surround sound with its full dynamic range.

dvdr3300h_uk_eng_17233d.indd 58

2005-10-19 10:41:31 AM