Pelco C1607M (6/04) Manual Do Utilizador
C1607M (6/04)
1
Introduction
The following instructions serve as a guide for upgrading the storage capacity of the DX8000 series digital video recorder
(DVR). Included are step-by-step directions on how to install the DX8000-UP250 hard disk upgrade kit. The directions
illustrate how to upgrade your DVR to accommodate two hard disk drives.
(DVR). Included are step-by-step directions on how to install the DX8000-UP250 hard disk upgrade kit. The directions
illustrate how to upgrade your DVR to accommodate two hard disk drives.
IMPORTANT: If this upgrade requires the replacement of the DX8000’s primary/system hard disk drive (drive 1
nearest the CD/DVD drive), refer to the instructions for replacing the primary drive (manual number C1606M).
This manual should be included with this upgrade kit if a primary drive replacement is necessary.
nearest the CD/DVD drive), refer to the instructions for replacing the primary drive (manual number C1606M).
This manual should be included with this upgrade kit if a primary drive replacement is necessary.
PARTS LIST
NOTE: This upgrade kit includes one or more Pelco-certified hard disk drives. Using any other hard disk drives
with the DX8000 voids the manufacturer’s warranty for this product.
with the DX8000 voids the manufacturer’s warranty for this product.
Qty Description
1-2 250 GB Hard Disk Drive(s)
0-1 80-pin Straight IDE Data Cable
2-4 Mounting screws
1-2 250 GB Hard Disk Drive(s)
0-1 80-pin Straight IDE Data Cable
2-4 Mounting screws
TOOLS NEEDED
1
Phillips-head screwdriver #1 (nonmagnetic)
1
Properly grounded ESD wrist strap and mat
4
Small containers for storing screws (optional)