Sanyo DSR - 300 Manual Do Utilizador
INSTALLATION AND CONNECTIONS
4
18
English
INTRO
DUC
TI
ON
1
When you have finished making all the
other connections, insert the power
plug into the wall outlet.
other connections, insert the power
plug into the wall outlet.
There is no power switch. The display indicators flash, and
after a few moments, the monitor screen displays the
camera image.
after a few moments, the monitor screen displays the
camera image.
z
When turning the power ON for the first time
“PLEASE SET THE CLOCK” is displayed on the
monitor screen. Follow the procedures on P. 22 to set
the clock.
“PLEASE SET THE CLOCK” is displayed on the
monitor screen. Follow the procedures on P. 22 to set
the clock.
z
If the clock is already set
The operation display area is displayed.
The operation display area is displayed.
z
If the CHANGE DISK indicator is flashing in red
The digital video recorder has a self-check function that
indicates problems. If there is a problem at power ON or
during operation, the type of problem is indicated by
how rapidly the CHANGE DISK indicator flashes.
Contact a Sanyo Authorized Service Centre if the
CHANGE DISK indicator flashes.
4 flashes per second:
The digital video recorder has a self-check function that
indicates problems. If there is a problem at power ON or
during operation, the type of problem is indicated by
how rapidly the CHANGE DISK indicator flashes.
Contact a Sanyo Authorized Service Centre if the
CHANGE DISK indicator flashes.
4 flashes per second:
The hard disk is checked automatically at power ON.
If a hard disk problem is found, the CHANGE DISK
indicator flashes, and the hard disk must be replaced
or reformatted. If you need to save images stored on
the disk, contact a Sanyo Authorized Service Centre.
If a hard disk problem is found, the CHANGE DISK
indicator flashes, and the hard disk must be replaced
or reformatted. If you need to save images stored on
the disk, contact a Sanyo Authorized Service Centre.
1 flash per second:
Fan problem
z
If you disconnect the power cable
Do not move the recorder or subject it to vibration for at
least 30 seconds after turning OFF the power.
The disk in the hard disk drive briefly keeps spinning
after power OFF due to inertia, during which time the
head is unstable. At this time, the disk is sensitive to
shocks or vibrations, so avoid even light shocks.
Do not move the recorder or subject it to vibration for at
least 30 seconds after turning OFF the power.
The disk in the hard disk drive briefly keeps spinning
after power OFF due to inertia, during which time the
head is unstable. At this time, the disk is sensitive to
shocks or vibrations, so avoid even light shocks.
Connecting the power cord
* Attach the supplied ferrite core to the base of the
power cable (coiling not necessary).
*
Operation
display area
01- 01- 04
00: 00: 00 EN
00: 00: 00 EN
10FPS
e00_l8had_us_7.book Page 18 Wednesday, March 10, 2004 2:47 PM