Sanyo DSR - 300 Manual Do Utilizador
RECORDING AREA SET
3
English
55
By default, when all of the space in the hard disk’s normal
recording area and alarm recording area has been used
up, repetitive overwriting is automatically started (resulting
in the older data being replaced).
However, it may be desirable to prevent overwriting in
such a case when recorded images are to be checked or
edited. To do this, follow the procedure described below to
allow only a single overwrite for each recording area.
recording area and alarm recording area has been used
up, repetitive overwriting is automatically started (resulting
in the older data being replaced).
However, it may be desirable to prevent overwriting in
such a case when recorded images are to be checked or
edited. To do this, follow the procedure described below to
allow only a single overwrite for each recording area.
1
Using <RECORDING CONDITIONS SET>
from the menu, set “OVERWRITE” for
the “NORMAL RECORDING AREA” or
“ALARM RECORDING AREA” to “OFF”.
from the menu, set “OVERWRITE” for
the “NORMAL RECORDING AREA” or
“ALARM RECORDING AREA” to “OFF”.
z
When this setting has been made, it will ensure that the
front panel’s FULL or ALARM FULL space warning
indicator will flash when the hard disk’s remaining
space is indicated in the operation display.
front panel’s FULL or ALARM FULL space warning
indicator will flash when the hard disk’s remaining
space is indicated in the operation display.
2
Select “3. RECORDING AREA SET”
from <MAIN MENU 1> and press the [ ]
button.
from <MAIN MENU 1> and press the [ ]
button.
The <RECORDING AREA SET> screen appears.
3
Move the cursor to “AREA FULL
RESET” under “NORMAL RECORDING
AREA”, then press the [ ] button.
RESET” under “NORMAL RECORDING
AREA”, then press the [ ] button.
A <WARNING> screen appears with “NO” flashing.
4
Press the [
] or [
] button to select
“YES”, then press the [ ] button.
The “NORMAL RECORDING AREA” is setup for possible
overwriting.
overwriting.
5
Move the cursor to “AREA FULL
RESET” under “ALARM RECORDING
AREA”, then press the [ ] button.
RESET” under “ALARM RECORDING
AREA”, then press the [ ] button.
A <WARNING> screen appears with “NO” flashing.
6
Press the [
] or [
] button to select
“YES”, then press the [ ] button.
The “ALARM RECORDING AREA” is setup for possible
overwriting.
overwriting.
7
Press the [EXIT/OSD] button.
The display returns to the normal screen.
z
To allow automatic overwriting, set “OVERWRITE” for
“NORMAL RECORDING AREA” or “ALARM
RECORDING AREA” to “ON”.
“NORMAL RECORDING AREA” or “ALARM
RECORDING AREA” to “ON”.
z
Whenever “AREA FULL RESET” is carried out, the
“NORMAL RECORDING AREA” and the “ALARM
RECORDING AREA” are setup for possible overwriting.
The “ARCHIVE AREA” is initialized and images are
deleted.
“NORMAL RECORDING AREA” and the “ALARM
RECORDING AREA” are setup for possible overwriting.
The “ARCHIVE AREA” is initialized and images are
deleted.
Setting overwrite permission
Setting overwriting for the normal recording
area
area
AREA FULL
RESET
Flashing
Setting overwriting for the alarm recording area
To finish this process
e00_l8had_us_7.book Page 55 Wednesday, March 10, 2004 2:47 PM