Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Sanyo
  4. DSR-3709
  5. Manual Do Utilizador

Sanyo DSR-3709 Manual Do Utilizador

Download
Página de 126
GENERAL SET
4
88
English
SE
TTIN
GS
z
After “VIDEO LOSS” is detected, it can be cancelled by 
performing either of the following.
(1) Input a video signal.
(2) If no video input is required, use a [CAMERA SELECT] 
button to select the camera for which video loss was 
detected and then press and hold the same button.
Use the following procedure to set a warning buzzer to 
sound for alarms or when hard disk space becomes 
insufficient.
1
Press the [MENU] button, turn the jog 
dial to select “3. GENERAL SET”, and 
then turn shuttle dial clockwise. 
The <GENERAL SET> screen is displayed.
 
2
Turn the jog dial to select “2. BUZZER 
SET”, and then turn the shuttle dial 
clockwise.
The <BUZZER SET> screen is displayed.
(1) ALARM (default setting: OFF)
Sounds the buzzer when a alarm occurs.
(2) DISK FULL (default setting: ON)
Sounds the buzzer when overwriting is forbidden and 
the hard disk capacity becomes insufficient.
(3) DISK ERROR (default setting: ON)
Sounds a buzzer when a hard-disk error occurs.
(4) LOCK WARNING (default setting: ON)
Sounds a buzzer if a button is pressed while the 
security lock is on. Specifically, the buzzer sounds 
twice with an interval of approximately 0.5 seconds.
(5) KEY IN (default setting: OFF)
Sounds the buzzer when a button is pressed.
(6) NON REC (default setting: OFF)
A buzzer is sounded upon loss of recording.
3
Turn the shuttle dial clockwise.
“OFF” flashes for “ALARM”.
4
Turn the jog dial to display “ON”, and 
then turn the shuttle dial clockwise.
[Settings] (‹ indicates default setting)
Use the above procedure whenever necessary to 
change buzzer settings (ON or OFF).
5
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to 
the normal screen.
z
To stop a buzzer, press any button or turn either the jog 
dial or shuttle dial.
Setting the buzzer
MENU
                  <BUZZER SET>
             ALARM            : OFF
             DISK FULL        : ON
             DISK ERROR       : ON
             LOCK WARNING     : ON
             KEY IN           : OFF
             NON REC          : OFF
(1)
(2)
(3)
(4)
(5)
(6)
Setting
Description
‹
OFF
The buzzer is not sounded when an alarm is 
generated.
ON
The buzzer is sounded when an alarm is generated.
                  <BUZZER SET>
             ALARM            : ON
             DISK FULL        : ON
             DISK ERROR       : ON
             LOCK WARNING     : ON
             KEY IN           : OFF
             NON REC          : OFF
EXIT/OSD
e00_l8hbg_us_7.book  Page 88  Thursday, November 25, 2004  1:44 PM