Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Sanyo
  4. DSR-5009P
  5. Manual Do Utilizador

Sanyo DSR-5009P Manual Do Utilizador

Download
Página de 227
128
English
SCREEN SET
4
INTRODUCTION
SETTINGS
NETWO
R
K
 
CO
NT
RO
L
NETWORK 
OP
ERATIO
N
NE
TW
ORK
 
SETTINGS
OTHER
OPE
RATIO
N
Use the following procedure to scroll through video from all 
cameras at a specified interval.
The interval for automatic selection can only be set for full 
screen and quad display.
Example: Automatic switching of the full-screen display 
every 5 seconds.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is 
displayed.
2
Turn the jog dial to select “4.SCREEN 
SET” and then turn the shuttle dial 
clockwise.
The <SCREEN SET> screen is displayed.
3
Turn the jog dial to select “FULL” for 
“2.SEQUENCE SET” and then turn the 
shuttle dial clockwise.
“1S” flashes for “FULL”.
4
Turn the jog dial to set the interval to 
“5S” and then turn the shuttle dial 
clockwise.
Automatic selection is set to an interval of 5 seconds.
5
Use the same operation to set the 
switching interval for quad screen 
display.
“INDIV.” cannot be selected for “QUAD”.
z
The interval applies to all cameras on the main monitor and 
monitor 2. To set the interval for each camera when 
displaying video at full screen, select “INDIV.” in step 4 and 
then go to “MAIN/MON.2 MONITOR SET”. 
z
The interval can be set anywhere between 1 and 30 
seconds.
6
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal 
screen.
Example: Setting the display interval of each camera’s 
video for the main monitor and monitor 2.
1
Make timer settings for “TIME PERIOD 
A” and “TIME PERIOD B” on the <TIME 
PERIOD SET> screen. (JP.69)
Specify “TIME PERIOD A” and “TIME PERIOD B”.
2
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is 
displayed.
Setting the interval and monitors for 
automatic screen selection
MENU
                 <SCREEN SET>
       
1.MULTI SCREEN           :  NORMAL
          QUAD POSITION SET          ->
          MULTI 9 POSITION SET       ->
          MULTI 16 POSITION SET      ->
       2.SEQUENCE SET
          FULL  : 1S         QUAD :  1S    
          MAIN/MON.2 MONITOR SET     ->
       3.MASK                   :  OFF
          MASK SET                   ->
       4.COLOR LEVEL SET             ->
Setting the time period to switch the display on 
the main monitor and monitor 2
                 <SCREEN SET>
       
1.MULTI SCREEN           :  NORMAL
          QUAD POSITION SET          ->
          MULTI 9 POSITION SET       ->
          MULTI 16 POSITION SET      ->
       2.SEQUENCE SET
          FULL  : 5S         QUAD :  1S
          MAIN/MON.2 MONITOR SET     ->
       3.MASK                   :  OFF
          MASK SET                   ->
       4.COLOR LEVEL SET             ->
EXIT/OSD
MENU
e00_l8hbd_xe_7.book  Page 128  Tuesday, April 5, 2005  11:41 AM