COBY electronic KTF-DVD 1093 Manual Do Utilizador
•
Time Zone
Select the time zone.
(Central, Mountain, Pacific, Alaska, Hawaii, Atlantic, Eastern).
Daylight Saving
Set the time saving function on/off.
Time
ITEM DESCRIPTION
Menu Language
Setup the menu language.
Color Mode
Setup the color mode. (Normal, Warm, Cool)
Zoom Mode
Adjust the display mode. (Normal, 4:3).
Restore Default
Restore settings to the factory default.
ITEM DESCRIPTION
Antenna
Setup the antenna type as Air or CATV.
Auto Scan
Search channels automatically.
Press the right direction button to start searching, press EXIT to quit.
Show/Hide
Skip the unwanted channels.
Press the up/down direction button to select the channel, press OK to set block.
Press OK again to release.
Favorite
Make the favorite channels collection.
Press the up/down direction button to select the channel, press OK to set it as
the favorite channel. Press OK again to release.
Channel No
Edit the channel label.
Channel Label
1. Select “Channel No”, press the left/right direction button to set the channel.
2. Select “Channel Label”, press the right direction button to show the edit
menu. In the menu, press the left/right direction button to move left/right,
Press the up/down direction button to make changes.
3. To clear the label, repeatedly press the up/down direction button to display
the blank input.
ITEM
DESCRIPTION
DVD
TV Function
.17 .
Time Setup
Option Setup
Channel Setup
ro
e ootin
Should your DVD player develop a problem, please check below before requesting service:
Should the player develop a malfunction, unplug the player for 30 minutes. After
that, power on the player and the restore function should reset the player.
that, power on the player and the restore function should reset the player.
Symptom
Check and Action
No power
1. Make sure the unit has been powered on manually.
2. Check if the power cord has been properly connected to the power outlet.
3. Make sure the battery pack is fully charged.
Does not play
1. No disc, load a disc.
2. Disc has been loaded upside down. Place the disc with the label side up.
3. Disc's rating level is higher than the player's setting.
4. Disc is incorrect type for the player.
5. Disc is damaged or dirty. Clean the disc or try another one.
6. Moisture may be condensed inside the player. Remove the disc and leave the unit
power on for one or two hours.
2. Disc has been loaded upside down. Place the disc with the label side up.
3. Disc's rating level is higher than the player's setting.
4. Disc is incorrect type for the player.
5. Disc is damaged or dirty. Clean the disc or try another one.
6. Moisture may be condensed inside the player. Remove the disc and leave the unit
power on for one or two hours.
No Picture
1. Check if the system connection is proper and secure.
2. Check if the connection cables are damaged.
3. Clean the disc.
2. Check if the connection cables are damaged.
3. Clean the disc.
Picture noisy/
distorted
distorted
1. Disc is damaged or dirty. Clean the disc or try another one.
2. Reset the color system.
2. Reset the color system.
No sound or sound
output not complete
output not complete
1. Check if the player has been switched on and correctly set.
2. Check if the system connections are secured.
3. Press AUDIO button to select other audio tracks of the disc.
4. Check if the MUTE function of the TV or amplifier has been activated.
5. There will be no sound output during REVERSE PLAY/PAUSE/SLOW and
SEARCH.
2. Check if the system connections are secured.
3. Press AUDIO button to select other audio tracks of the disc.
4. Check if the MUTE function of the TV or amplifier has been activated.
5. There will be no sound output during REVERSE PLAY/PAUSE/SLOW and
SEARCH.
Remote control
does not work
does not work
1. Make sure the unit is turned on.
.
2. Remove the obstacles between the remote control and the player.
3. Point the remote control towards the remote sensor on the player.
4. Check if the batteries of the remote control have been loaded with correct
polarities.
5. Replace the batteries of the remote control.
3. Point the remote control towards the remote sensor on the player.
4. Check if the batteries of the remote control have been loaded with correct
polarities.
5. Replace the batteries of the remote control.
Malfunction
.18 .