Panasonic CY-TUN153U Manual Do Utilizador

26

27

25

26

Power Control Lead 
(Blue/white stripe) 
To the external amplifi er control power lead of the Head 
Unit. 
To ACC power, 

12 V DC, if the Head Unit has no 

external amplifi er control power lead. 

Battery Lead 
(Yellow) 
To the car battery, continuous 

12 V DC.

Ground Lead
(Black) 
To a clean, bare metallic part of the car chassis.

Parking Brake (Side Brake) Connection Lead 
(Bright green)
Be sure to wire the parking brake (side brake) for safety 
and preventing accidents. 

 Power connector

 This unit is designed for use in a car having a 12 V negative ground battery system. 
 To prevent damage to the unit, be sure to follow the connection diagram. 
 Do not insert the power connector into the unit until the wiring is completed. 
 Be sure to insulate any exposed wires to prevent short circuiting with the car chassis. Bundle all cables, and prevent 

cable terminals from touching any metal parts. 

 Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery may 

clear the memory. 

 Run the cords avoiding the spots where the temperature can be extremely high. 
 Fit a vinyl cap over unused connection terminals, to prevent contact with metal parts etc.

Note: 
 Strip about 5 mm of the lead ends for connection.
 Be sure to fully plug in the connectors. Secure them 

with clamps and tapes. 

 All other installation methods require the use of 

dedicated metal fi ttings. Consult with a qualifi ed 
servicing engineer or your dealer if other methods are 
required. 

Note:
 Refer to individual instruction and installation manuals 

for each device for detailed installation and wiring. 

 Connect this unit to the Expansion Module (CY-

EM100U, option) with the Head Unit/Expansion Module 
Connecting Cable and RCA cord (video) (supplied). 

 When the device that provides video output is 

connected to the System-up Connector, connect the 
video cable to input connector below the port to which 
the System-up Connector is connected. 

Note for the Head Unit remote control unit (page 13): 
 With some Head Units, the Head Unit remote control 

unit may not have buttons intended specifi cally for TV 
operation, so some operations cannot be used for TV 
operation. But that does not mean that the tuner or the 
Head Unit are malfunctioning.

(Fuse 3 A)

TV Antenna
Refer to page 24 for the TV 
antenna connection. 

VIDEO 
(Yellow)

 RCA cord

 Head Unit/Expansion 
Module Connecting Cable 
To one of the system-up 
connectors (input) 

Head Unit/Expansion Module Connecting 
Cable (supplied with CY-EM100U) 

Port 1 IN to 4 IN 
System-up connectors 
(input)

Video input 

Video input 

RCA cord (option) 

Video (Yellow)

Video 
(Yellow)

If the Expansion Module (CY-EM100U, option) is not 
connected and the ACC is not mounted on the vehicle:
 Connect the power control lead of this unit to the 

external amplifi er control power lead of the Head Unit. 
If this connection is not made, the battery will run 
down.