DISH Network Duo 322 Manual Do Utilizador

1. Press the MENU button. 

2. Select the

 

 

option. 

3. Select the Diagnostics option. 

This test checks that the receiver telephone connection is correct. Select the 
Connection option to begin the test. The receiver displays a message asking 
you to wait until the test is done.

•

If the telephone connection is correct, the receiver displays a

 

Connection OK message.

•

Select the Dial Out option so the receiver can make a toll-free call to the 
Customer Service Center. Press the SELECT button to start the call. When 
the call is done, select the

 

Cancel option to exit the test menu.

•

If the telephone line is not connected properly, the receiver displays a 
failure message. Check the telephone connection and then repeat the test. 
 Note: If you have the receiver connected to a DSL (Digital Subscriber 
Line) phone line, it may cause this test to fail. If so, you will need to install 
a DSL filter between the receiver and the phone jack on the wall. You can 
get a DSL filter from your Internet Service Provider or a local electronics 
parts store.