Avaya 4622SW IP Manual Do Utilizador

Some Web sites might include the ability to pass names and associated telephone numbers to 
the 4622SW IP Telephone. In such cases, applicable Web pages display an AddToSD softkey, 
as provided by the Web site’s author.

1. Press the AddToSD softkey. 

The Speed Dial Editing screen displays, to allow you to change the name or number. The 
prompt “Use dialpad to edit Number” displays, with the cursor positioned at the end of the 
Number field. 

Note:

For assistance with entering information on this screen, see the section in 

Your Telephone Administrator can turn off the ability to create Speed Dial buttons 
from the Web application. In this case, the AddToSD softkey does not display.

2. If no Name/Number changes are needed, proceed to Step 

. To change the telephone 

number, use the Left Arrow softkey, and/or the Right Arrow softkey to move the cursor to 
the right of the character(s) to be changed. Press the Backspace button to remove that 
character and re-enter the correct character. 

3. To change the name, press the Line/Feature button on either side of the Name field to move 

from the Number to the Name field. 

4. Use the Left Arrow softkey, and/or the Right Arrow softkey to move the cursor to the right 

of the character(s) to be changed. Press the Backspace button to remove that character 
and re-enter the correct character. 

5. When the Name and/or Number are updated, press the Save softkey to add the information 

to a Speed Dial button. (Press the Cancel or Delete softkey to exit without saving.)

The Name/Number entry is updated, and all Speed Dial buttons are re-sorted in 
alphabetical order by Name. The Speed Dial Main screen re-displays. 

6. To exit the Speed Dial application, press the Phone/Exit (

) button or select another 

application if applicable.