DISH Network Solo 811 Manual Do Utilizador

Two sets of color coded RCA A/V O

 connectors provide 

good quality standard definition audio and video. Use phono 

RCA-type cables to connect these outputs to a VCR, for 

example, for use in recording. You can also connect the audio 

outputs for use with either of the HDTV video connections 

(DISH DVI and YP

) or the S-Video connection.

These input connections allow other devices (such as a VCR or 

game console) to display content through the receiver audio/

video outputs. Use a phono RCA style cable to make the 

connection to the outputs of other video source devices. 

: While your receiver can convert the input to high 

definition format on the DISH DVI or YP

 connections, the 

receiver cannot convert the picture to high definition quality.
These inputs are selected as sub-channels of Channel 0

 

from the 

program guide. See Using the Program Guide in Chapter 3 for 

details. 

Connect to the A

 with an Audio Digital 

Optical cable (available at consumer electronics stores). This 

connection point is for use with high quality sound systems. 

This input connection receives programming signals from either 

local off-air broadcasters in both analog and digital broadcast 

formats or a cable TV system. Use a coaxial cable to make this 

connection to an external off-air antenna or a cable TV service. This 

connector is color coded black.

This input connection can only be used if your receiver 

is activated with qualifying DISH Network programming.

 

This input connection receives UHF signals from the remote 

control. Connect the UHF antenna here, and set it so it 

doesn't touch anything. Set the antenna straight up so you 

can use the remote control as far away as possible. This 

connector is color coded green.

The S

 connection point is used to connect your 

DISH Network antenna to your receiver so you can receive 

satellite TV signals. The connection is made using RG-6 

coaxial cable. This connector is color coded blue.