Avaya 555-233-128 Manual Do Utilizador

Before performing static addressing, verify that all the requirements listed in the 

 section of the 

 are met. You do not have to 

consider item 

on page 20, as it refers to the DHCP server. In addition, you must have the 

values for the following parameters. Failure to do so can cause data entry errors that prevent 
the telephone from working. Such errors can also have a negative impact on your network. Print 
copies of this checklist for each subnet.

The usual way to assign IP Addresses to IP telephones is the automatic method described in 

. There might be times, however, when manual assignment of IP 

Addresses is desired.

CAUTION:

Static addressing is necessary when a DHCP server is unavailable.

Because of the difficulties associated with static addressing, we very strongly 
recommend that a DHCP server be installed and static addressing avoided.

 

1. 

The IP Address of the media server/gatekeeper (H.323) or the Registration 
Server (SIP).

2. 

The transport layer port number of the address of the Management Complex 
(media server/gatekeeper, applicable only to telephones running H.323 
software). Although this can be a value between 0 and 65535, the default 
value is 1719. Do not change this value unless it conflicts with an existing port 
assignment.

For SIP, the transport layer port number of the Registration Server; the default 
is 5060.

3. 

The IP Address of the gateway/router.

4. 

The IP netmask.

5. 

The IP Address of the TFTP server.