Avaya 555-233-128 Manual Do Utilizador

Página de 106
Site-Specific Option Number Setting
Issue 6 February 2007
79
 
4. Press the * (asterisk) key to terminate the procedure without restarting the telephone. 
Press the # (pound) key to restart the telephone.
The remainder of this procedure depends on the status of the boot and application files.
 See 
.
Site-Specific Option Number Setting
!
CAUTION:
CAUTION:
Do not perform this procedure if you are using static addressing. Perform this 
procedure only if you are using DHCP and the LAN administrator instructs you to 
do this.
Use the following procedure to set the Site-Specific Option Number (SSON).
1. While the telephone is on-hook and idle, press the following sequence of keys on the 
faceplate of the telephone:
Mute 7 7 6 6 # (Mute S S O N #) 
Note:
Note:
Press the Mute button momentarily. Do not press this button while pressing other 
keys/buttons. The 4630/4630SW IP Telephones and the 4690 IP Conference 
Telephone do not have a dedicated Hold button. For all other 4600 Series IP 
Telephones, pressing the Hold button instead of the Mute button also works.
All IP telephones except the 4601 display the following text left-justified at the top of the 
display:
where ddd is the value of SSON.
Because it does not have a display, the 4601 IP Telephone’s Call Appearance Line 
indicators wink out the current SSON value. Call Appearance Line a represents the SSON’s 
first digit. Call Appearance Line b represents the SSON’s second digit, and Call 
Appearance Line a represents the SSON’s third digit. For each digit, the applicable indicator 
winks the number of times represented by the current SSON value 600 milliseconds on, 200 
milliseconds off. An 1800 millisecond pause occurs before changing indicators. If the 
current value is zero, the appropriate Call Appearance Line indicator flutters five times 50 
milliseconds on, 50 milliseconds off instead of winking.
After the 4601 “displays” the current SSON, the Message Waiting indicator at the top of the 
telephone and the Message button LED on the faceplate flash 500 milliseconds on, 500 
milliseconds off to indicate an entry is expected.
SSON=
ddd
New=_