Grandstream Networks GXP2120 Manual Do Utilizador

5

6

1. Make sure the phone is idle 

2. Press the “MENU” button to access the keypad MENU to configure the phone.

3. Select MENU-> Config, to configure settings for SIP Proxy, Outbound Proxy, 

SIP User ID, SIP Auth ID, SIP Password

4. Follow MENU options to configure the basic features of the phone – for ex-

ample: the IP address if using a static IP. For details, please check GXP Series 

User Manual.

5. Please contact your ITSP for additional settings that may be necessary to 
configure the phone.

1. To access the  MENU, press the round MENU button.

2. Navigate the menu by using the UP/DOWN and LEFT/RIGHT buttons.

3. Press the round MENU button to confirm a menu selection.

4. Delete an entry by pressing the MUTE button.

5. The phone automatically exits MENU mode with an incoming call, the phone is 

off-hook or the MENU mode is left idle for 20 seconds.

GXP2110 Keypad

GXP2120 Keypad

PHONE CONFIGURATION:

1. Ensure your phone is powered up and connected to the Internet.

2. Press MENU button to go into menu of the phone.

3. Press down arrow button to Status and press MENU button to see IP address. 

4. Type the phone’s IP address in your PC browser. (See figure below)

5. The default administrator password is “admin”; the default end-user password 

is “123”.

GXP2120/2110 EXT EXPANSION MODULE

Note: The extension module is an additional accessory for the GXP2120/2110 

and is not included in the box

The GXP2120/2110 EXT module is an ideal solution for the busy enterprise envi-

ronment looking to add the ability to receive and dispatch calls efficiently. 

Each expansion module has 56 programmable buttons. The GXP phone sup-

ports up to two EXT Modules, adding 112 fully programmable phone extensions 

to the phone.