Avaya 555-233-781 Manual Do Utilizador

Reset your IP telephone when other troubleshooting suggestions do not correct the problem or 
after being advised to do so by your System Administrator. 

CAUTION:

Use a Power Cycle only with the approval of your System Administrator and only 
when a reset does not resolve the problem. Power cycling might cause stored 
information such as options and settings to be lost. 

This basic reset procedure can resolve most problems.

1. Press the Mute button.

2. Using the dial pad, press the following keys in sequence: 7 3 7 3 8 # 

The display shows the message “Reset values? * = no # = yes.” 

3. Choose one of the following: 

4. Press # to restart the phone or * to terminate the restart and restore the phone to its 

previous state. 

Note:

Any reset/restart of your phone might take a few minutes. 

Reset the phone without 
resetting any assigned values.

Press * (asterisk). 
A confirmation tone sounds and the display 
prompts “Restart phone? * = no # = yes.” 

Reset the phone and any 
previously assigned 
(programmed) values 
(Use this option only if your 
phone has programmed, static 
values).

Press # (the pound key). 
The display shows the message “Resetting 
values.” Your IP Telephone resets its 
programmed values, such as the IP Address, to 
their default values, and re-establishes the 
server connection. The display then prompts 
“Restart phone? * = no # = yes.”