Avaya 555-245-600 Manual Do Utilizador
Avaya Application Solutions platforms
50 Avaya Application Solutions IP Telephony Deployment Guide
Rapid Spanning Tree Protocol (RSTP)
The IEEE 802.1D (STP) and IEEE 802.1w (RSTP) Spanning Tree Protocols are supported on
the ETH LAN ports.
the ETH LAN ports.
Port mirroring
The G450 supports network traffic monitoring by port mirroring. You can configure port mirroring
on any LAN port. You implement port mirroring by connecting an external traffic probe device to
one of the LAN ports. The probe device monitors traffic that is sent and received through other
ports by copying the packets and sending them to the monitor port.
on any LAN port. You implement port mirroring by connecting an external traffic probe device to
one of the LAN ports. The probe device monitors traffic that is sent and received through other
ports by copying the packets and sending them to the monitor port.
Port redundancy
You can configure port redundancy on the G450. Port redundancy allows you to provide both a
primary link and a backup link to an important resource.
primary link and a backup link to an important resource.
WAN services
The G450 has an internal router and provides direct access to outside WAN lines. You can use
the G450 as the endpoint device for a WAN line. You can also use the G450 as the router for a
WAN line with an external endpoint device.
the G450 as the endpoint device for a WAN line. You can also use the G450 as the router for a
WAN line with an external endpoint device.
Physical media
To use the G450 as the endpoint device for a WAN, install a WAN media module and connect
the WAN line to a port on the media module. When you connect a WAN line to a media module,
the G450 serves as the router for the WAN line.
the WAN line to a port on the media module. When you connect a WAN line to a media module,
the G450 serves as the router for the WAN line.
You can also use the fixed ETH WAN Fast Ethernet port as a WAN endpoint by configuring the
port’s interface for PPPoE encapsulation (ADSL modem) or Ethernet-DHCP/static IP (cable
modem).
port’s interface for PPPoE encapsulation (ADSL modem) or Ethernet-DHCP/static IP (cable
modem).
To use the G450 as a router, connect the external endpoint device to the ETH WAN port on the
G450 front panel using a standard network cable.
G450 front panel using a standard network cable.
WAN line support
The G450 supports the following types of data WAN line:
●
E1/T1
●
Universal Serial Port
●
PPPoE (ADSL modem)
●
Ethernet-DHCP/static IP (cable modem)