Avaya 4602 Manual Do Utilizador
Signaling Protocol Identifier
Issue 2.2 April 2005
55
2. To change the SIG value, press *.
Depending on the current value, the next sequential valid SIG value is selected and
displayed as the protocol. For example, if the current value is SIP (2), pressing * changes
the value to 0 (default). If the current value is H.323 (1), pressing * changes the value to 2
(SIP).
displayed as the protocol. For example, if the current value is SIP (2), pressing * changes
the value to 0 (default). If the current value is H.323 (1), pressing * changes the value to 2
(SIP).
If a value different from the current Group value is entered, all IP telephones except the
4601 display the following text left-justified at the top of the display:
4601 display the following text left-justified at the top of the display:
The 4601 IP Telephone instead flashes both Message Waiting indicators 500 milliseconds
on, 500 milliseconds off to indicate an entry is expected.
on, 500 milliseconds off to indicate an entry is expected.
3. Press the * button to terminate the procedure, or the # button to save the new value. If you
press the # button, all IP telephones except the 4601 display the following text:
The new value is saved. All phones except the 4601 display the following text left-justified at
the top of the display:
the top of the display:
The 4601 IP Telephone instead flashes both Message Waiting indicators 500 milliseconds
on, 500 milliseconds off to indicate an entry is expected.
on, 500 milliseconds off to indicate an entry is expected.
4. Press the * (asterisk) key to terminate the procedure without restarting the telephone.
Press the # (pound) key to restart the telephone.
The remainder of this procedure depends on the status of the boot and application files.
See
See
.
Save new
value?
*=no #=yes
value?
*=no #=yes
New value
being saved
being saved
Restart phone?
*=no #=yes
*=no #=yes