Avaya NN43113-101 Manual Do Utilizador

Method A: 

1.

Press the wall-mount lever, and pull the IP Deskphone away from the 
stand, as shown in 

. 

2.

Use the stand cover (the part you removed in 

), to mark the wall-mount holes by pressing the 

bottom of the stand cover firmly against the wall in the location where 
you wish to install the IP Deskphone. Four small pins on the bottom of 
the stand cover make marks on the wall. 

3.

Use the marks as a guideline for installing the wall-mount screws (not 
provided). Install the screws so that they protrude 3 millimeters (mm) 
(1/8 inch) from the wall.

4.

Install the IP Deskphone stand mounting holes over the screw heads 
as indicated in 

 (Method A). You need to 

remove the IP Deskphone from the wall to adjust the lower screws. 

5.

When the lower screws are snug, install the IP Deskphone on the 
mounting screws, and then tighten the top screws.