Avaya IP Office Phone Manual Do Utilizador

 

 

Expansion Ports 1
Green Status LEDs 

ISDN Ports 1
Green Status LEDs 

WAN Port 
Green Status LED 

(Cascade Port)

Red = Alive but not initiated 
Green = Running OK

Yellow LED
LAN Collision 

Green LED
Solid Green LED - LAN OK 
Flashing Green - LAN OK and active

Yellow LED 
On - 100Mbps operation 
0ff - 10Mbps operation 

 

•  LAN Ports 

The eight auto-negotiating 10/100 BaseT LAN hub ports are used for PC and server 
connectivity. They can also be used to connect to the optional IP400 WAN3 Expansion 
Module (see page 26) and IP telephones. 

  LAN ports allow information relating to incoming and outgoing telephone calls to be 

forwarded to PC based applications. They also provide access to the router 
functionality/configuration of the IP406 Office platform for both data and Voice over IP 
(VoIP) calls. (Where IP telephony is required, the hub must be connected to a suitable  
LAN switch with QoS capabilities.) This eight port auto-negotiating 10/100 BaseT LAN 
hub supports a single MAC address only (printed on the base of the module). 

  Where more than eight LAN connections are required, the eighth LAN port can be used 

for cascading to other hubs. The Cascade pushbutton to the right of this port is used to 
set the mode. When the Cascade switch is in the out position the port can be 
connected to another hub without the need for a crossover cable, i.e. the port is an MDI 
type port. When the Cascade switch is in the in position the port can be connected 
directly to a PC. 
 

IP406 Office PRI 30 E1 & PRI 24 T1 are supplied with one red CAT5E cable. IP406 Office 
Analog 4 is supplied with four red CAT5E cables. IP406 Office BRI 16 is supplied with 
eight red CAT5E cables. For Port Pinouts and Cables, refer to pages 63 and 67 
respectively.