Avaya IP Office Phone Manual Do Utilizador
Technical Data
Technical Specifications - Page 83
IP Office Installation Manual
Technical Data - Page 83
40DHB0002USCL – Issue 9 (28th October 2003)
Technical Specifications
Trap Generation
RFC1215 Generic SNMP Traps:
Trap type
Generated
warmStart
Upon soft reboot.
coldStart
Upon unexpected reboot such as a power outage.
linkDown
Upon transition of an interface (PPP or Frame-Relay) from the
up operational state into the down operational state.
up operational state into the down operational state.
linkUp
Upon transition of an interface (PPP or Frame-Relay) from the
down operational state into the up operational state.
down operational state into the up operational state.
authenticationFailure
Upon attempted SNMP request with mismatched community for
the type of operation.
the type of operation.
IPO-MIB:
Trap type
Generated
ipoGenLKSCommsFailureEvent
Upon loss of communication with a configured License
Key Server.
Key Server.
ipoGenLKSCommsOperationalEven
t
t
Upon re-gaining communication with a configured License
Key Server.
Key Server.
IPO-PHONES-MIB:
Trap type
Generated
ipoPhonesChangeEvent
Upon change of a DT, DS or IP extension phone type after
normal start-up. No traps are issued for POT extensions as the
presence or absence of such phones cannot be established
hence the ipoPhonesType for such extensions is always
potPhone.
normal start-up. No traps are issued for POT extensions as the
presence or absence of such phones cannot be established
hence the ipoPhonesType for such extensions is always
potPhone.
MIB Loading
In order to SNMP manage an IP Office system, that is browse its MIBs and fully interpret
the traps it sends out, the MIBs supported by IP Office must be loaded and compiled for
use with your Network Management System. The supported standard and proprietary
MIBs together with the MIB files relied upon for definitions are provided on the IP Office
Admin CD off the directory snmp_mibs. Detailed below are details of how to install the
appropriate MIBs with a number of Network Management Systems.
the traps it sends out, the MIBs supported by IP Office must be loaded and compiled for
use with your Network Management System. The supported standard and proprietary
MIBs together with the MIB files relied upon for definitions are provided on the IP Office
Admin CD off the directory snmp_mibs. Detailed below are details of how to install the
appropriate MIBs with a number of Network Management Systems.
HP OpenView Network Node Manager 6.41 and earlier:
MIBs are installed in Network Node Manager by selecting Options and Load/Unload MIBs:
SNMP from the menu and then using the Load… option and browsing for MIB files to load
and compile. The following MIBs must be installed in the order listed to fully SNMP
manage an IP Office system:
SNMP from the menu and then using the Load… option and browsing for MIB files to load
and compile. The following MIBs must be installed in the order listed to fully SNMP
manage an IP Office system:
MIB file
Source
RFC2737-ENTITY-MIB
snmp_mibs\standard on OpenView install CD
AVAYAGEN-MIB.mib
snmp_mibs\IPOffice on IP Office Admin CD
IPO-PROD-MIB.mib
snmp_mibs\IPOffice on IP Office Admin CD
IPO-MIB.mib
snmp_mibs\IPOffice on IP Office Admin CD
INET-ADDRESS-MIB.mib
snmp_mibs\Standard on IP Office Admin CD
RFC2213-INTEGRATED-
SERVICES-MIB
SERVICES-MIB
snmp_mibs\standard on OpenView install CD
DIFFSERV-DSCP-TC.mib
snmp_mibs\Standard on IP Office Admin CD
DIFFSERV-MIB-HPOV.mib
snmp_mibs\Standard on IP Office Admin CD
IPO-PHONES-MIB.mib
snmp_mibs\IPOffice on IP Office Admin CD