Avaya 9040 Manual Do Utilizador

Park the current call. This function can be programmed with or without a 
park slot number.  
If programmed with a park slot number, pressing the appropriate DSS key 
will park/unpark calls from that park slot. The DSS key lamp is lit when a 
call is parked in that park slot.  
If programmed without a park slot number, calls being parked are assigned 
a number based on the parking telephone's extension number plus 0, 1, 2 
etc. in sequence. Whilst the user has parked calls the DSS key lamp is lit. 
Pressing the key while not on a call will display the parked calls and allow 
any of those calls to be unparked.  
In all cases, calls parked by a user will recall that user if not unparked after 
a set delay.  

Switches do not disturb on/off. This function does not require any data 
entered when programmed.  
When on, the appropriate DSS key lamp is lit and N is shown on the 
display. All caller's receive busy tone or are diverted to the user's voicemail 
if enabled. Pressing the DSS key again switches off do not disturb.  

Replaces the user name and number details on the phone display with the 
date and time. This function does not require any data entered when 
programmed.  
When on the appropriate DSS key lamp is lit.  

Allows the programming of the functions in this section against other DSS 
keys. This function can be programmed with or without data.  
If programmed without data see "Programming Functions Against DSS 
Keys" on page 26.  
If programmed with a value of 1, see "Storing User, Park Slot and Queue 
Numbers" on page 25. 

Make a call using an account code or enter an account code during a call. 
This function can be programmed with or without data.  
Note: Any account code entered must match a valid code stored on the 
telephone system. If a matching code does not exist, RENTER ACCOUNT 
is displayed when the DSS key is used.  
If programmed without an account code, the telephone user is able to enter 
the code to use after pressing the DSS key.