Peerless Industries KX-TDA15 Manual Do Utilizador

300

Feature Guide

A PT user can perform the following programming:

Personal Programming: Customising the extension according to his needs.

System Programming: Customising the PBX according to organisational needs.

Manager Programming: Customising specified frequently changing items (e.g., 
Charge Management and Remote Extension Lock).

•

COS programming determines what programming can be performed (

Mode Limitation [516]):

•

The extension which is connected to the lowest numbered extension port can perform both 
personal programming and system programming regardless of the COS.

•

The extension(s) assigned as the manager COS can perform manager programming.

•

During programming, the PT is considered to be busy.

•

Access to system programming and manager programming is allowed only one at a time. 
However, one PBX supports up to 16 simultaneous programmers (one system 
programmer + 15 personal programmers, one manager programmer + 15 personal 
programmers, or 16 personal programmers).

•

System Programming Password Level
To access system programming, a valid password must be entered. There are two types 
of passwords, which are set at the factory, and can be changed through system 
programming.

•

Personal Programming Data Default Set
A user can return all of the items programmed on the telephone to default.

– System programming and personal programming
– Personal programming only
– No programming

All system programming available for PT programming is 
accessible (

Programming [110]).

Permitted system programming is accessible (

Password for User—for PT Programming [111]). Each access to 
system programming can be controlled.