Patton electronic SmartNode 4110 Series Manual Do Utilizador
PPP configuration task list
320
SmartWare Software Configuration Guide
30 • PPP configuration
Mode: Configure
Step
Command
Purpose
1
node(cfg) #port ethernet slot port
Enters Ethernet port configuration mode for the
interface on slot and port
interface on slot and port
2
node (prt-eth)[slot/port]# encapsulation
{ip|pppoe|multi}
{ip|pppoe|multi}
Defines the payload type(s) to be used on the
Ethernet:
Ethernet:
•
‘ip’: IP traffic only (not used for PPP)
•
‘pppoe’: PPPoE sessions only
•
‘multi’: both IP traffic and PPPoE sessions
3
node (prt-eth)[slot/port]# [no] bind inter-
face name [router ]
face name [router ]
Binds the Ethernet port to the IP interface to be
used for the direct IP traffic (only required if
encapsulation ‘ip’ or ‘multi’ is selected)
used for the direct IP traffic (only required if
encapsulation ‘ip’ or ‘multi’ is selected)
4
node(prt-eth)[slot/port]#[no] shutdown
Enables the ethernet port
5
node(prt-eth)[slot/port]#pppoe
Enters PPPoE mode
6
node(pppoe)[slot/port]#session name
Creates PPPoE session with the name name
7
node(pppoe)[slot/port]# [no] bind inter-
face name [router]
face name [router]
or
node (pppoe)[slot/port]# [no] bind sub-
scriber name
scriber name
Binds the PPPoE session directly to the IP inter-
face name in case no authentication is required
face name in case no authentication is required
Binds the PPPoE session to the PPP subscriber
name in case authentication is required
name in case authentication is required
8
(optional)
node (pppoe)[slot/port]# [no] use profile
ppp name
ppp name
Assigns a PPP profile other than the default pro-
file to this PPPoE session
file to this PPPoE session
9
(optional)
node(session)[name]#service Service-
Name
Name
Defines the tag ‘Service-Name’ to be supplied
with Active Discovery in order to identify the
desired remote peer (check whether the remote
peer supports this feature)
with Active Discovery in order to identify the
desired remote peer (check whether the remote
peer supports this feature)
10
(optional)
node(session)[name]#access-concentra-
tor AC-Name
tor AC-Name
The Active Discovery only accepts the PPPoE ses-
sion if the remote peer provides tag ‘AC-Name’
with its Active Discovery Offer as specified. This
allows to identify the desired remote peer
sion if the remote peer provides tag ‘AC-Name’
with its Active Discovery Offer as specified. This
allows to identify the desired remote peer
11
node(session)[name]#[no] shutdown
Initiates the establishment of the PPPoE session
and the PPP connection
and the PPP connection