Peerless Industries KX-TDA200 Manual Do Utilizador
1.28 Networking Features
274
Feature Guide
1.28.3.4 Call Transfer (CT)—by QSIG
Description
The PBX transfers the call to a destination extension in another PBX in QSIG network.
This feature complies with the following European Telecommunication Standard (ETS)
specifications: ETS 300 261 Call transfer supplementary service.
specifications: ETS 300 261 Call transfer supplementary service.
If the same trunk group is used for the incoming call and the transferred call, the following
situation will be possible.
situation will be possible.
[Example]
Conditions
•
This feature can be enabled or disabled on an ISDN (QSIG) port basis.
•
Call Transfer with Announcement and Call Transfer without Announcement is possible.
(
(
Extension 1000 of PBX-1
dials extension number
"2000", and the call is sent to
extension "2000" of PBX-2
through QSIG network.
dials extension number
"2000", and the call is sent to
extension "2000" of PBX-2
through QSIG network.
The call is transferred from
extension 2000 to extension
"1001" of PBX-1.
extension 2000 to extension
"1001" of PBX-1.
The call between PBX-1 and
PBX-2 is released, and the
call is connected directly to
the transfer destination of
extension 2000.
PBX-2 is released, and the
call is connected directly to
the transfer destination of
extension 2000.
PBX-1
QSIG
PBX-2
Dials "2000".
PBX-1
QSIG
PBX-2
Extn. 1000 Extn. 1001
Extn. 2000
Extn. 1000 Extn. 1001
Extn. 2000
Call to 2000
1
Transferred
to 1001
to 1001
2
3
1
2
3