Peerless Industries KX-TDA200 Manual Do Utilizador
1.5 Making Call Features
84
Feature Guide
1.5.5.3
Trunk Access
Description
There are the following features to access a trunk.
Conditions
•
COS programming determines the trunk groups available for making calls (
•
Trunk numbers can be referred on a trunk port basis (
•
Button Assignment
A flexible button can be customised as a G-CO, L-CO, or S-CO button as follows:
A flexible button can be customised as a G-CO, L-CO, or S-CO button as follows:
It is possible to assign trunks in the following ways:
Dialling the Trunk Access number selects a CO button according to the priority: S-CO
G-CO
L-CO
•
Direct Trunk Access
By pressing an idle CO button, it automatically switches on the hands-free operation mode
and allows a user to use On-hook Dialling. The user need not press the SP-PHONE
button, MONITOR button, or lift the handset.
By pressing an idle CO button, it automatically switches on the hands-free operation mode
and allows a user to use On-hook Dialling. The user need not press the SP-PHONE
button, MONITOR button, or lift the handset.
•
Group Hunting Order for Idle Line Access
An idle trunk is selected from the trunk groups assigned for Idle Line Access. If multiple
trunk groups are available, the trunk group hunting sequence can be determined through
system programming.
An idle trunk is selected from the trunk groups assigned for Idle Line Access. If multiple
trunk groups are available, the trunk group hunting sequence can be determined through
system programming.
Feature
Description
Accessing method
Idle Line
Access (Local
Access)
Access (Local
Access)
Selects an idle trunk
automatically from the assigned
trunk groups.
automatically from the assigned
trunk groups.
Dial the Idle Line Access number. Or
press a L-CO button.
press a L-CO button.
Trunk Group
Access
Access
Selects an idle trunk from the
corresponding trunk group.
corresponding trunk group.
Dial the Trunk Group Access number
and a trunk group number. Or press a
G-CO button.
and a trunk group number. Or press a
G-CO button.
S-CO Line
Access
Access
Selects the desired trunk directly. Dial the S-CO Line Access number and
the trunk number. Or press the S-CO
button.
button.
Type
Assignable parameter
Loop-CO (L-CO)
No parameter (All assigned trunk groups
through system programming are applied.)
through system programming are applied.)
Group-CO (G-CO)
A trunk group is assigned.
Single-CO (S-CO)
A specified trunk is assigned.
– The same trunk to the S-CO button and to a G-CO button
– The same trunk group to more than one G-CO button
– More than one L-CO button
– The same trunk group to more than one G-CO button
– More than one L-CO button