Avaya 15-601040 Manual Do Utilizador

By default, when you start dialing a number on your phone, the phone immediately connects to the telephone system
and starts passing the digits you dial to the phone system. You cannot correct the digits you have already dialed except
by ending the call and starting again. Also if you pause dialing for too long the phone system may think that you have
finished dialing and will attempt to connect the call using only the digits you have completed dialing so far. 

En-bloc dialing allows you to compose and edit the number to dial on your phone's display before it is sent to the phone
system to be dialed. 

Through the phone's menus you can select whether you want to use traditional or en-bloc dialing when making calls. Your
chosen setting is then applied whenever you are using a phone that supports en-bloc dialing. 

You can enable or disable your en-bloc dialing setting through the phone's Features menu. 

1. Press the Features soft key if shown.

·

To access the menu during a call, press the   right arrow key or press the 

 PHONE key and then press

the Features soft key.

2. Use the 

 up and down 

 arrow keys to scroll the display to the option Call Settings. 

3. Press the Select soft key or the OK button or the   right arrow key. 

4. Use the 

 up and down 

 arrow keys to scroll the display to the option En-Bloc Dial. 

5. Use the   left and right   arrow keys to change the setting or use the indicated soft key. 

1400 Series only

The A-menu accessed by pressing the 

 key can be used to set a number of phone options specific to the phone. You

can use the Erase menu to reset those options back to their defaults. 

1. Press the 

 MENU button. 

2. Use the 

 up and down 

 arrow keys to locate the option Advanced.... Press the Select soft key. 

3. Use the 

 up and down 

 arrow keys to locate the option Erase. Press the Select soft key.

4. Use the 

 up and down 

 arrow keys to select which settings you want to erase. 

·

Contacts 
This options is not used as the contacts are stored by the telephone system. 

·

Call Log 
This option is not used as your call log is stored by the telephone system. 

·

Options 
This option is used to reset other settings set through the phone's A-menu. 

·

Language 
This option is not used as your language selection is stored by the telephone system. 

·

All 
Will only be applied to your A-menu options. 

5. Press the Erase soft key. 

6. When completed, press the Done soft key.

7. Press the Exit soft key to exit the menus.