Avaya 1210 Manual Do Utilizador

Attach the foot stand in the appropriate slots depending on the desired 
angle for your IP Deskphone. If you insert the foot stand into the upper 
slots, your IP Deskphone sits at a 25-degree angle. If you insert the foot 
stand into the lower slots, your IP Deskphone sits at a 55-degree angle. 

If you install your IP Deskphone on a wall, do not attach the foot stand.

1.

Align the bottom tabs on the foot stand with the position 1 slots or the 
position 2 slots on the back of your IP Deskphone. 
In position 1 the IP Deskphone sits at a 25-degree angle.
In position 2 the IP Deskphone sits at a 55-degree angle.

 shows the slots on the back of the IP 

Deskphone.

2.

Press the foot stand into the slots until it snaps into place.

Use the following procedure to connect the handset to the IP Deskphone.

1.

Plug the end of the handset cord with the short straight section into 
the handset.

2.

Plug the other end of the handset cord with the long straight section 
into the handset jack marked with the 

+

 symbol on the back of the IP 

Deskphone.

3.

(Optional) Thread the cord through the channel in the foot stand (if 
installed) so that it exits on the side of the foot stand.

 shows the connections on the back of the IP 

Deskphone.

If you have a headset, you can connect the headset to the IP Deskphone. 
For information on how to use your headset with your IP Deskphone, see 
the Avaya 1200 Series IP Deskphones User Guide (NN40010-302).