Cisco Systems OL-20862-01 Manual Do Utilizador

The Cisco Unified IP Phone 9951 and 9971 supports the add-on accessory Cisco Unified Video Camera.

The Cisco Unified Video Camera connects to your Cisco Unified IP Phone and allows you to make a 
point-to-point video call with another Cisco Unified IP Phone with a Cisco Unified Video Camera 
attached. If a phone does not have a Cisco Unified Video Camera attached, it can only receive one-way 
video.

This chapter contains the following information:

To configure the Cisco Unified Video Camera, you must perform the following configuration steps in 
Cisco Unified Communications Manager administration:

The parameters described in the following procedure can be enabled on either the Phone Configuration 
window (Device > Phone), the Enterprise Phone Configuration window (System > Enterprise Phone 
Configuration), or the Common Phone Profile window (Device > Device Settings > Common Phone 
Profile). Be sure to also check the corresponding Override Common Settings parameter in the 
configuration window. The Phone Configuration window is referenced below for purposes of the 
procedure description.

For more information about parameters that can be configured in any of these three configuration 
windows, see the 

In the phone configuration window (Device > Phone) of the phone to which you are adding the Cisco 
Unified Video Camera, enable the Cisco Camera parameter. This field is located in the Product Specific 
Configuration layout portion of the window.