Aastra Telecom 9480i CT Series Manual Do Utilizador
Operational, Basic, and Advanced Parameters
41-001160-03, Rev 00, Release 2.4
A-121
Parameter –
sip lineN autodial timeout
sip lineN autodial timeout
AutoDial Timeout
(in Web UI)
(in Web UI)
Aastra Web UI
Advanced Settings->LineN->Autodial Settings
Configuration Files aastra.cfg, <mac>.cfg
Description
On a per-line basis, this parameter specifies the time, in seconds, that
the phone waits to dial a preconfigured number after the handset is
lifted from the IP phone cradle.
the phone waits to dial a preconfigured number after the handset is
lifted from the IP phone cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Format
Integer
Default Value
0
Range
0 to 120
Examples
sip line1 autodial timeout: 30
Draft 1