Aastra Telecom 9480i CT Series Manual Do Utilizador
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
A-194
41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
•
webapps - Indicates the softkey is hardcoded to access an Aastra
XML-based application (xml.myaastra.com). By default, Softkey 1 is
assigned as the WebApps key on the 9480i, 9480i CT, 6755i, 6757i,
and 6757i CT. (Not applicable to the CT handsets). Also accessible
from the Services menu on these phones.
XML-based application (xml.myaastra.com). By default, Softkey 1 is
assigned as the WebApps key on the 9480i, 9480i CT, 6755i, 6757i,
and 6757i CT. (Not applicable to the CT handsets). Also accessible
from the Services menu on these phones.
•
flash - Indicates the softkey is set to generate a flash event when it is
pressed, or a feature key is pressed on the CT handsets. The IP
phone generates flash events only when a call is connected and there
is an active RTP stream (for example, when the call is not on hold).
pressed, or a feature key is pressed on the CT handsets. The IP
phone generates flash events only when a call is connected and there
is an active RTP stream (for example, when the call is not on hold).
•
sprecode - Indicates the softkey is configured to automatically
activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
•
park - Indicates the softkey is configured to park incoming calls when
pressed.
pressed.
•
pickup - Indicates the softkey is configured to pick up parked calls
when pressed.
when pressed.
•
lcr - Indicates the softkey is configured for “last call return” when
pressed.
pressed.
•
call forward - Indicates the softkey is configured for accessing the
Call Forward features on the phone. A Call Forwarding Mode must be
enabled to use this softkey. “Account” mode is the default.
Call Forward features on the phone. A Call Forwarding Mode must be
enabled to use this softkey. “Account” mode is the default.
•
blf/xfer - Indicates the softkey is configured to transfer calls AND
configured for BLF on a single key.
configured for BLF on a single key.
•
speeddial/xfer - Indicates the softkey is configured to transfer calls
AND configured for speeddialing to a specific number.
AND configured for speeddialing to a specific number.
•
speeddial/conf - Indicates the softkey is configured to be used as a
speeddial key AND as a conference key.
speeddial key AND as a conference key.
•
dir - Indicates the softkey is set for accessing the Directory List.
•
callers - Indicates the softkey is set for accessing the Callers List.
•
icom - Indicates the softkey is set to be used as the Intercom key.
•
services - Indicates the softkey is set to be used as the Services key.
•
phonelock - Indicates the softkey is set to be used to lock/unlock the
phone.
phone.
•
paging - Indicates the softkey is set for Group Paging on the phone.
Pressing this key automatically sends a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without
involving SIP signaling.
Pressing this key automatically sends a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without
involving SIP signaling.
•
empty - Indicates the softkey is configured to force a blank entry on
the IP phone display for a specific softkey.
the IP phone display for a specific softkey.
The softkeys are added in order (from softkey1 to softkey20) after any
hard-coded keys have been added. If a particular soft key is not defined,
it is ignored.
hard-coded keys have been added. If a particular soft key is not defined,
it is ignored.
Format
Text
Default Value
none
Draft 1