Avaya 1600 Series Manual Do Utilizador

Before you administer DHCP and HTTP, and TLS, as applicable, complete the information in 

. If you have more than one Gateway, HTTP/TLS server, subnetwork mask, and 

Gatekeeper in your configuration, complete 

 for each DHCP server.

The 1600 Series IP Telephones support specifying a list of IP addresses for a gateway/router, 
HTTP/HTTPS server, and Avaya Media Server Gatekeeper(s). Each list can contain up to 255 
total ASCII characters, with IP addresses separated by commas with no intervening spaces. 
Depending on the specific DHCP application, only 127 characters might be supported.

When specifying IP addresses for the file server or media server, use either dotted decimal 
format (“xxx.xxx.xxx.xxx”) or DNS names. If you use DNS, the system value DOMAIN is 
appended to the IP addresses you specify. If DOMAIN is null, the DNS names must be fully 
qualified, in accordance with IETF RFCs 1034 and 1035. For more information about DNS, see 

on page 44 and 

The file server file path is the “root” directory used for all transfers by the server. All files are 
uploaded to or downloaded from this default directory. In configurations where the upgrade 
script and application files are in the default directory, do not use item 6 in 

. 

As the LAN or System Administrator, you are also responsible for:

●

Administering the DHCP server as described in 

.

●

Editing the configuration file on the applicable HTTP or HTTPS file server, as covered in 

1. Gateway (router) IP address(es)
2. HTTP server IP address(es)
3. Subnetwork mask
4. Avaya Media Server Gatekeeper IP 

address(es) 

5. Avaya Media Server Gatekeeper port

Although this can be a value between 0 and 

65535, the default value is 1719. Do not change 

the default value unless that value conflicts with 

an existing port assignment.

6. HTTP server file path
7. Telephone IP address range

From:
To:

8. DNS server address(es)

If applicable.

9. HTTPS server address(es)

If applicable.