Avaya 40DHB0002USCL Manual Do Utilizador

Dimensions 

IP401: 

       Width: 

255mm. 

 

Height: 

71mm. 

 

Depth: 

235mm. 

IP403/6/12 and Expansion Modules :  Width: 445mm.   Height: 71mm.   Depth: 245mm 

Environmental 

0 to +40

°C. 95% relative humidity, non-condensing. 

Weight 
(in Kgs) 

 Unit: 

 401 403 406 412 Analog16 DT/DS16 

 

DT/DS30   WAN3  So8  Phone8  Phone16  Phone30  

 

1.2 2.6 3.0 3.0  2.9 

3.0 

3.50 

2.8 2.75  2.80  2.90  3.10 

Power Supply 
Consumption 
(nominal Watts) 

2.5mm DC inlet socket. 24Vdc Power input. Rating  24Vd.c., 2A max. 

  Unit: 

 401 403 406 412 Analog16 DT/DS16 

 

DT/DS30   WAN3  So8  Phone8  Phone16  Phone30  

 

24 26 16 17.5  5 

24 

30 

12 24  12 

16 

30 

Lump-in-Line PSU  Power Requirements: I/P 100-240Vac, 50/60Hz, 81-115VA, Input current 2A max 

O/P 24Vdc, 1.875A, output Power 45W max. 
The Lump-in-line PSU is CE/UL/Dentori Safety Approved.  

 

DTE 

25 way D-Type female connector, V.24/V.28. (9 way D-type on IP412s) 

ISDN  

ROW Interfaces: 
BRI :  

RJ45 sockets. ETSI S/T Interface to CTR3 for Pan European Connection. 

PRI E1:  

RJ45 socket. ETSI T Interface to CTR4 for Pan European Connection. 

PRI E1-R2:   RJ45 socket. ETSI T Interface to CTR4 for Pan European Connection. 
PRI E1-R2:   75

Ω BNC Coax.. ETSI T Interface. 

PRI T1:  

RJ45 socket: FCC Part 68/JATE connection. 

USA Interfaces: 
PRI T1 Service:  

Ground Start (GS) – Default, E&M, 56k data for 5ESS, 56/64/64 restricted for 4ESS 

PRI ISDN Switch support:  

4ESS, 5ESS, DMS-100, DMS-250 (includes conformance to ANSI T1.607 & Bellcore Special Report 
SR4287, 1992 

PRI ISDN Services:  

AT&T Megacom 800, AT&T WATS (4ESS), AT&T SDS Accunet 56kB/s & 64kB/s (4ESS), AT&T 
Multiquest (4ESS). 

Analog ports 

RJ45 sockets: Loop start/Ground start (regional dependant) 

Power Fail ports 

RJ45 sockets: telephone ports act as master sockets 

ISDN  
Data Rates 

BRI: B-channel 64kbps or 56kbps, D-channel 16kbps. 
PRI: B-channel 64kbps or 56kbps, D-channel 64kbps. 

Telephone 

RJ45 sockets. EU - Telephone ports act as master sockets. 
CLI Schemes: DTMFA, DTMFC, DTMFD, FSK and UK20.  
REN  = 2 
Off Hook current = 25mA. 
Ring Voltage = 40V (nominal) RMS. 
External Bell (via analog port); REN = 1 

LAN 

RJ45 sockets. Auto-negotiating 10/100BaseT Ethernet (10Mbps).  
Port 8 is MDI/MDIX switchable via the adjacent Cascade pushbutton switch.   
Refer to pages 15, 19 and 23. 

WAN 

37 way D-Type female sockets. X.21 interface to 2048k bps, V.35 interface to 2048k bps and V.24 Interface to 
19k2 bps.  

Audio 

3.5mm Stereo Jack socket. Input impedance - 10k /channel. 
Maximum a.c. signal – 200mV rms. 

External  
Control 

3.5mm Stereo Jack socket. Switching Capacity - 0.7A. 
Maximum Voltage - 55V d.c. On state resistance - 0.7

Ω. 

Short circuit current - 1A. Reverse circuit current capacity - 1.4A.