Aastra Telecom 53I Manual Do Utilizador
Network Settings
41-001160-00, Release 2.1, Rev 04
4-35
Configuring Network and Session Initiation Protocol (SIP) Features
Configuring the IP Phones
6
Select Type of Service SIP.
or
Select Type of Service RTP.
or
Select Type of Service RTCP.
or
Select Type of Service RTP.
or
Select Type of Service RTCP.
7
Enter a value for “Type of Service SIP”. Default is 26.
or
Enter a value for “Type of Service RTP”. Default is 46.
or
Enter a value for “Type of Service RTCP”. Default is 46.
or
Enter a value for “Type of Service RTP”. Default is 46.
or
Enter a value for “Type of Service RTCP”. Default is 46.
Valid values are 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
the applicable priority to the Protocol setting as shown in the table
on
For more information, see the section
.
8
Press Done (3 times) to save the changes.
Note: The session prompts you to restart the IP phone to apply the configuration settings
9
Select Restart.
IP Phone UI
Step Action