Aastra Telecom 41-001343-02 Manual Do Utilizador

41-001343-02 REV04 – 05.2014

The following table identifies the default DSCP-to-priority mapping structure.

0-7

0

8-15

1

16-23

2

24-31

3

32-39

4

40-47

5

48-55

6

56-63

7

Parameter – 
vlan id port 1

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Allows you to configure a VLAN ID that associates with the physical Ethernet Port 1 (PC 
port).

Notes:
• Setting the “vlan id port 1” to 4095 and “vlan id” to any ID from 1 to 4094 will allow 

frames from the LAN port (containing a VLAN ID) to be untagged before being for-
warded to the PC port and frames from the PC port (without a VLAN ID) to be tagged 
with the configured VLAN ID before being forwarded to the LAN port.

Example:
You enable tagging on the phone port as normal but set the “vlan id port 1” to 4095 and 
the “vlan id ” to any ID from 1 to 4094. The following example sets the LAN port to be on 
VLAN 3 but the PC port is configured as untagged:

tagging enabled: 1
vlan id: 3
vlan id port 1: 4095

• Alternatively setting the “vlan id port 1” to any ID from 1 to 4094 and “vlan id” to 4095 

will allow frames from the PC port (containing a VLAN ID) to be untagged before being 
forwarded to the LAN port and frames from the LAN port (without a VLAN ID) to be 
tagged with the configured VLAN ID before being forwarded to the PC port.

• PC Port parameters are not applicable to the 6730i IP Phone.

Integer

4095

1 to 4095

vlan id port 1: 3