Aastra Telecom 41-001343-02 Manual Do Utilizador

41-001343-02 REV04 – 05.2014

Parameter – 
sip lineN diversion display

(N is a line number from 1 to 9)

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

For a specific line on the phone, this parameter enables/disables the display of the Caller 
ID and/or caller name, and reason for diversion on the phones LCD for an outgoing call 
that is being diverted to another destination. The phone that receives the diverted call 
displays the Caller ID of the original call destination.

Note:
You must restart the phone after setting a value for this parameter.

Boolean

1

0 (disabled - do not display diversion information to the phone’s LCD)
1 (enabled - display diversion information to the phone’s LCD)

sip line1 diversion display: 0

Parameter – 
show call destination name

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Enable/disables the display of the call destination name to the LCD on the phone during 
incoming calls.

Boolean

0

0 (disabled)
1(enabled)

show call destination name: 1

Parameter – 
directory lookup suppression 
pattern

Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg

Allows a pattern-based configuration whereby if the configured pattern is found in the From 
header display name of an incoming call, the phone bypasses the local directory lookup and 
shows the display name as intended by the call manager (i.e. as specified in the From 
header).

Patterns that can be defined include:

“-->x+”

“==>x+” 

“@@@x+” 

“aaax+” 

Notes:
• Use | to specify multiple OR combined patterns. 
• Quotation marks must be used when defining the pattern.

String

NA

NA

directory lookup suppression pattern: “-->x+|==>x+|aaax+”